Photo By Lonely Walker at Shutterstock
Most homeowners have had to call out a plumber at some point. Many have even had an emergency plumbing situation. Plumbers across the country are keeping our plumbing systems and appliances in good working order. To do so, they use a range of different tools.
If you live in Mesa, AZ, or the surrounding area and are looking for a plumbing company, you may like to contact Schroeder Plumbing. The company has been in business since 1971 and can provide a plumber for all types of jobs, including leak detection and drain cleaning.
While DIY plumbing is never a good idea as it can be hazardous, many people are interested in finding out which tools are most commonly used by a plumber. Perhaps you’re interested in training to be one when you leave school or are just wondering how they can detect leaks and fix broken pipes. This article will look at some of the most common tools that are used by professionals daily.
What’s In The Tool Bag?
To complete repairs, carry out general maintenance and servicing, professionals need to have the right tools for the job. These common plumbing tools make plumbing repairs much easier and less time consuming.
In some cases, a plumbing job will be impossible without the appropriate tools. Plumbers need to be well prepared as they never know exactly what they will be faced with when making a house call. Some days they’ll be installing a plumbing system in a new home; on other days, they’ll be unblocking toilets or detecting leaks and replacing burst pipes or carrying out drain cleaning. No two days are exactly the same in the plumbing profession. Here are some standard tools that professionals always have in their van.
Plumbers used to have to carry around a whole bag full of different pipe wrenches, to ensure they had the correct tool for the job. New modern tools have been designed, which are adjustable to fit any type of pipe. Pipe wrenches are generally only used in homes that have steel and iron pipe, while tongue-and-groove pliers are used for modern piping.
These pliers are also sometimes called channel-type pliers, slip-joint pliers, or Channellock pliers. This handy tool is adjustable, has angled jaws and long handles, making it great for all types of pipe. Most professionals have tongue and groove pliers that are 10-inch size. They may also have some slightly larger or smaller pliers for unusual plumbing situations.
Plumbers will often need a sink wrench, which is a handy tool that allows old faucets to be changed. Basin wrenches are self-tightening and have pivoting heads and long handles. They are designed for both loosening and tightening fittings such as faucets and can be used in places that are difficult to reach.
Compression Sleeve Puller
A compression sleeve puller is useful for homes with either copper, PEX, or CPVC pipes as they are likely to have fixture shutoff valves. It can sometimes be challenging to unscrew shutoff valves using pliers or a wrench. Sometimes the compression sleeve will remain stuck to the pipe, making it very difficult to remove the ring and compression nut. A compression sleeve puller is a very useful tool that helps professionals pull the nut off without causing damage to the pipe.
Another necessary plumbing tool is a pipe wrench, which is used when working with large iron or galvanized steel pipes that have threading. Many plumbing fittings such as water heaters, yard hydrants, and pressure regulators require a pipe wrench to unscrew them. Plumbers also use pipe wrenches to remove large drain clean-out fittings.
Another type of wrench that’s commonly used by plumbing companies is an adjustable wrench. These are used to remove fixture shutoff valves and to open compression nuts, as well as the supply tubes on faucets. The tool has a smooth jaw so as not to damage chrome surfaces.
Plumbers often have to cut pipes when installing plumbing fixtures and fittings or to replace burst pipes. To do this, they will use either a hacksaw or a special tool known as a tubing cutter. This tool makes the job a lot quicker and easier. Tubing cutters are designed especially for different types of pipes. They are available for copper, PVC, or PEX tubing.
Plumbing companies are often asked to perform routine drain cleaning services. To do the job, they will use a drain auger to remove clogs from drains. Sometimes drain augers are also called plumbing snakes as they are a long, flexible tube that looks like a snake.
The cable can be fed through the drain and pipes to help clear any blockages. They have a circular drum that can be rotated to move the cable through the drain. This will help to break up any clogs and will also mean that the clogs can be extracted from the drain.
Drain augers are very effective tools, and it’s a good idea to regularly book a drain cleaning service as this will help keep your pipes free from blockages and in good condition.
Schroeder Plumbing, Arizona
If you live in Mesa, AZ or the surrounding area and are looking for a plumbing company, don’t hesitate to contact Schroeder Plumbing. The company can undertake all types of jobs, including leak detection and drain cleaning.
Schroeder Plumbing has been in operation since 1971 and has a fantastic reputation within the communities they serve. They provide excellent customer service and great value for money. The company also provides a 24/7 emergency call-out service.
Schroeder Plumbing’s experience in the area sets them apart from their competitors. They guarantee that you’ll be completely satisfied with their work and will return to make further repairs if you’re not.
Whether you’re looking to install a plumbing system into a new build home, have a plumbing emergency, or a dripping tap or blocked toilet that needs repairing, Schroeder Plumbing can help.
Call Schroeder Plumbing today on (480) 326-6959 for a free no obligations quote.